GM Tech2 Scanner Features

1. Authentic software in the GM Tech2 Scanner means the most comprehensive diagnostic software available for late model vehicles.
2. Support for on-board diagnostics on all systems 1992 thru current year.
3. Removable hardware modules provide insurance against scan tool obsolescence.
4. Large, easy-to-read backlit screen.
5. RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7. Ability to view the status of vehicle diagnostic tests as they run.
8. Bi-directional The authentic 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
9. Vetronix Tech 2 Specifications
10. Dimensions: 12″ X 6″ X 2″
11. Microprocessor: 32 bit,16 MHz
12. Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
13. Communications: Integral RS232 communication port.
14. Screen: 3.8.8 backlit monochrome with full graphics capability: 320, 40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

The following vehicles utilize the CAN interface