Lexia 3 Peugeot Citroen Diagnostics System

Description

Lexia 3 Peugeot Citroen Diagnostics System

latests 2022 software

on windows 10 laptop with SSD hard drive and 4gb RAM

Lexia 3 diagnostic system.

A comprehensive Citroen and Peugeot diagnostics.

Able to carry out  dealer functions.

Lexia 3 diagnostics software allows you to perform complete diagnostics from 1995 to present models.

Diagnostics Lexia 3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Lexia 3 Supported functions
Lexia 3 Unlike other universal car tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool.
Our diagnostic interface Lexia 3 contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic LEXIA 3 functions are supported
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full
listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98

Lexia 3 Software Languages
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech