Nitro Red Diesel Power Fuel Optimization Device Chip Tuning Box
Universal Fitment For ALL Diesel Engines Sold After January 1st, 1997.
NitroOBD2 finds out the hidden power of your car.
– Up to 35% more power
– Up to 25 % more torque
Conforms to CE, FC and RoHS Approval
What is NitroOBD2 Chip Tuning Box?
NitroOBD2 is a Chip Tuning Box which plugs into the OBD2 connector of your car to increase the performance of your car. When plugged in to the OBD2 connector, NitroOBD2 receives the information from the car ECU. NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine or the ECU and will not cause any negative effects to the car factory setting. Engine protection is built in. NitroOBD2 does not change any of the settings permanently. To turn back to the car’s original settings, just unplug NitroOBD2 from the OBD2 connector. Nitro OBD2 Can be swapped from car to easily, unlike a remap which is fixed.
NitroOBD2 works on the basis of changing the signal from the ECU. As a consequence, it changes the whole injection map.
The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable,
and after it is unplugged the ECU reverts back to the factory settings. NitroOBD2 is the cheap and safe way of tuning.
NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine.
NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are of extremely high quality.
Model: Nitro OBD2 Diesel
Voltage: 12 (V)
Working temperature: 0-60 (℃)
Installation and Calibration:
1 Pull out the car ignition key.
2 Find the OBD2 connector in your car and plug in Nitro Chip Tuning Box
3 Insert the key in the ignition and turn the key to the first stage. (Do not start the car)
4 Press the reset button for about 5 seconds. After releasing the button, just wait for a while, for about 30-54 sec. (Nitro OBD2 will communicate and connect with the ECU)
5 Start the engine.
6 Nitro OBD2 will recognise your car and your driving habits. After about 150 miles of driving Nitro OBD2 will adust itself to match perfectly to your car’s fuel economy.
Where is the OBD2 connector in your car?
1 Driver’s side, underneath dashboard, in the area under the steering column,
2 Driver’s side, underneath dashboard,between the driver-side door and steering column area
3 Driver’s side, underneath dashboard, between the steering column area and the center console
4 Driver’s side, dashboard instrument/gauge area, between the steering column and center console
5 Driver’s side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front of passenger area.
1 x Nitro OBD2 Diesel Chip Tuning Box Interface
1 x User Instructions