Shop

Autel IM608 Auto Diagnostic Tool Key Programming ECU Remapping Coding Scanner

£3,799.00

Description

Autel IM608 Auto Diagnostic Tool Key Programming ECU Coding remapping

The best ALL IN ONE system

1-Deep level Diagnostics

2-  Master Auto locksmith tool key coding and programming

3- Master remapping tuning and ECU flashing coding and regenerating.

Autel IM608 Professional Key Programming Tool

WARNING when buying these devices make sure you are dealing with a UK company not china because of importation tax and RTB warranty

Our prices includes 20% VAT and we are based near Derby England

 

■ Introduction

 

Autel MaxiIM IM608 is the most advanced key and immobiliser programmer

with the most capable  OE-level diagnostics and service functions.

Equipped with XP400 key programmer

·PC Supported

·MCU / EEPROM Chip Read / Write

·ECU Read / Write

 

ECU Coding Remapping virginising  

 

The Coding function is used to re-flash the vehicle control modules, it allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.

·MC9S12 Encrypted Chip Read / Write

·Key Reading / Writing

·Mercedes Infrared Key Reading / Writing

·Finding the Control Frequency

·IC Card Reading / Writing

 

MaxiFlash JVC_I ECU programmer

 

IM608 is a comprehensive immobiliser and key programming tool and ideal for auto technicians and locksmiths auto tuning parts recycling deep level diagnostics and DPF EGR delete functions

Smart Mode: for Guided and Automated Key Learning

Expert Mode: for Advanced Key Learning

Read PIN/CS(All Key Lost) ·

MIMO ECU

Refresh/Coding

Generate Key

BENZ 3rd Generation IMMO Add Key,

All key Lost, Key Learning

Key Learning

BMW FEM/BDC

Key Learning and ECU Adaptation

Remote Learning

BMW CAS4/3/2 Key Learning

Backup/Restore IMMO Data

VW/AUDI MQB Key Learning

48 Transponder (96-bit) Add Key.

All Key Lost  A6 All Key Lost, and More ·

MMO ECU Reset/Adaptation

 

■ Active Test

The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialisation, thus saving diagnostic time. Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.

 

Specification

·Operation System: Android 4.4.2,KitKat ·Processor: Samsung Exynos hex-core Processor(1.3GHz Quad-core ARM Cortex-A7+1.7GHz Dual-core ARM Cortex-A15) ·Memory: 2GB RAM & 64 GB On-board Memory ·Display: 10.1-inch LED capacitive touch screen with 1920*1200 resolution; Wi-Fi:(802.11 a/b/g/n/ac); USB 2.0 ·Connectivity: BT v.2.1+EDR; SD Card (Support up to 32GB); HDMI ·Camera(rear): 8.0 Megapixel, AF with Flashlight ·Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS) ·Audio: Microphone; Dual Speakers ·Input/output: 3-Band 3.5mm stereo / standard headset jack ·Power and Battery: Charging via 12V AC/DC power supply with the temperature between 0℃ to 45℃ ·Input Voltage: 12V (9-24V) ·Power Consumption: 6.5W ·Operating Temp: 0℃ to 50℃ (32 to 122℉) ·Storage Temp: -20℃ to 60℃ (-4 to 140℉) ·Dimensions(W*H*D): 300mm (11.81″) x 220.0mm (8.66″) x 50.0mm (1.97″) ·Weight NW: 1.42kg (3.13lb.) ·GW: 8.655kg(19.08lb) ·Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L-line, Flashing code, SAE-J1850 VPW, SAE-J1850PWN, CAN ISO11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN

Reviews

There are no reviews yet.

Be the first to review “Autel IM608 Auto Diagnostic Tool Key Programming ECU Remapping Coding Scanner”

Your email address will not be published. Required fields are marked *

About Us

Car parts provides fast online Carparts for both homes and businesses. We provide high quality business cards, postcards, flyers, brochures, stationery and other premium online print products.

Follow Us

JOIN OUR NEWSLETTER

We Use cookies to ensure that we give you the best experience on our website .if you continue to use this site we will assume that you are happy with it.

Privacy policy Accept
0
    0
    Your Cart
    Your cart is emptyReturn to Shop